Restoration phone support available around the clockCall (877) 289-0037

Homes and commercial properties

Florida

Industrial Water Damage Cleanup in Florida

Our fresh-start team provides high-capacity water removal and drying for industrial facilities while accounting for equipment, safety zones, and production areas.

  • Restoration phone support around the clock
  • Residential and commercial loss response
  • Measured extraction, cleanup, and drying
  • One restoration team from assessment to dry standard

Call (877) 289-0037Browse services

Signs to look for

When to call us for industrial water cleanup

As the home starts over, if you notice any of these problems, call us before water has more time to spread into nearby materials.

Water reached the base of production equipment or a control panel

To put this behind you, do not energize anything that has been wet, including for a quick test.

Water is standing in a floor pit, trench drain or sump

To put this behind you, pits collect the deepest water and often the dirtiest.

Raw material or packaging on the floor and bottom racks is wet

For a clean slate, bagged product, corrugated cases and fiber drums wick water upward fast.

Water entered an electrical room or motor control center

To put this behind you, that can take the whole facility offline, and the equipment inside is not ours to touch.

Bare concrete has gone dark and is staying dark

As the home starts over, unsealed slab absorbs a surprising volume and gives it back slowly.

The water has contacted process chemicals or oils

On the way back to normal, water that mixed with process fluid is contained and handed to your environmental health and safety lead.

What happens

How we work through industrial water cleanup

Our fresh-start team adjusts the work to what ended up wet, how far the water traveled, and which materials can be saved.

Working inside your site safety program

To put this behind you, contractor orientation, sign in, escort requirements and required protective equipment.

Lockout tagout performed by your authorized personnel

To put this behind you, isolation of any equipment near our work is done by your authorized personnel under your program.

A hazard walk with your environmental health and safety lead

For a clean slate, we walk the disrupted area with your lead, agree the boundary, note chemical and process hazards, and confirm which zones are off limits.

Bulk water removal at plant scale

For a clean slate, submersible pumps and truck mounted extraction clear open concrete without delay. To put this behind you, volume, not finish, is the constraint on most industrial floors.

Pits, trench drains and low points cleared

As the home starts over, water hides below floor level and keeps humidity high.

Racking and raw material triage

To put this behind you, bottom rack stock, bagged material and packaging are sorted into usable, questionable and loss, then photographed and counted before anything leaves.

Talk with a restoration specialist

Water loss in Florida?

Describe the source, the impacted rooms, and when you first noticed the damage.

Call (877) 289-0037

What comes next

What comes next from our fresh-start team

For a clean slate, here is how we usually handle industrial water cleanup near Florida.

  1. 1

    You call with the lines that are down

    As the home starts over, which areas are affected, what equipment is involved, and your cost per production hour.

    Your call
  2. 2

    Isolation, and the sentence we say every time

    On the way back to normal, your authorized personnel isolate the source and de energize disrupted areas under your own program. As the home starts over, nothing wet gets energized to test it, by anyone, for any reason.

    +5 minutes
  3. 3

    Your safety and access requirements collected

    On the way back to normal, orientation, permits, escort rules, protective equipment and any confined space requirements. As the home starts over, paperwork runs in parallel with dispatch.

    +15 minutes
  4. 4

    Crew oriented and badged before entering the plant

    As the home starts over, crews complete your orientation at the gate instead of negotiating at it. For a clean slate, crews are dispatched today or tonight depending on your shift pattern.

    Before we enter
  5. 5

    Hazard walk and zone boundaries agreed

    To put this behind you, we walk the area with your lead, mark the wet boundary, and agree which zones are released to us and which stay locked out.

    On arrival
  6. 6

    Bulk water off the floor and out of the pits

    To put this behind you, pumps and extraction clear open concrete first, then low points and trench drains under your permits.

    First hours on site
  7. 7

    Racking and raw material triaged the same shift

    To put this behind you, wet stock is sorted, photographed and counted with your materials team present. As the home starts over, waiting a shift turns questionable material into confirmed loss.

    Same shift

Understanding the cost

What can affect the price

As the home starts over, we explain the recommended work and price before you approve the job. As the home starts over, these examples show what may change the estimate.

Common situationWhat the estimate may includeTypical range
Plant area up to about 10,000 square feet, bare or sealed concrete, clean waterFor a clean slate, national estimate. To put this behind you, includes pump out, extraction, pit clearing, drying and documentation, before any equipment work.$10,000 to $40,000
Production hall or several bays affectedFor a clean slate, national estimate. On the way back to normal, scales with congestion, air volume, material triage and how many zones need separate handback.$40,000 to $200,000
Industrial water removal and drying billed by affected area, open concreteFor a clean slate, national estimate.$3 to $8 per square foot
Racking and raw material triage with documented disposalFor a clean slate, national estimate for sorting, photographing, counting and removing wet stock.$5,000 to $30,000
Drying support around production equipment, our work plan onlyNational estimate for targeted airflow, humidity control and documentation around machinery. Electrical testing and equipment repair are your contractor's reset plan.$2,000 to $15,000
Desiccant dehumidification for a large open plant volume, per dayFor a clean slate, national estimate including temporary power arrangements. For a clean slate, single desiccant units and standard commercial dehumidification are priced far lower.$1,500 to $4,000
After hours dispatch on the first visitAs the home starts over, national estimate for the after hours call out only.$100 to $400
  • Affected floor area and how open it is
    As the home starts over, open concrete extracts and dries efficiently per square foot.

  • How much of it is concrete versus finished space
    On the way back to normal, bare and sealed slab has few porous finishes to remove, which keeps unit rates lower than finished commercial space.

  • Depth and how many pits and drains are involved
    To put this behind you, low points hold the deepest water and often need permit controlled entry. As the home starts over, each pit adds setup, an attendant and time.

  • Volume of air to dehumidify
    To put this behind you, high bay space is a large air volume.

  • Equipment units multiplied by days
    On the way back to normal, air movers run roughly $25 to $40 per unit per day and Professional dehumidifiers roughly $70 to $110 per unit per day.

  • Raw material and racking triage volume
    On the way back to normal, sorting, photographing, counting and removing wet stock is labor.

Why timing matters

What can happen when the area stays wet

To put this behind you, water can keep moving into nearby materials even when the surface looks dry.

Downtime outgrows the cleanup invoice almost immediately

As the home starts over, multiply your contribution per production hour by the hours a line is idle.

Energizing wet equipment destroys it and endangers people

As the home starts over, water in a control panel or across motor windings invites arc flash and insulation failure.

Flash rust appears on machined surfaces within hours

As the home starts over, bare steel, ways, tooling and unpainted castings corrode fast in a saturated space.

Corrosion inside panels shows up weeks after the water is gone

As the home starts over, moisture that entered a variable frequency drive or a programmable logic controller enclosure keeps working on contacts and boards.

Helpful service information

What to know about industrial water cleanup

For a clean slate, start with the short explanation. To put this behind you, open a card if you want a little more detail.

What is happening inside the property

For a clean slate, work out your contribution per production hour, then multiply by the hours each affected line will be idle.

Read the explanation

On the way back to normal, the economics of an industrial water loss are unlike any other property type.

How the step back toward normal is decided

To put this behind you, equipment that has been wet does not get energized until a qualified electrician has evaluated it.

Read the explanation

For a clean slate, there is one rule on an industrial site that has no exceptions. To put this behind you, equipment that has been wet does not get energized until a qualified electrician has evaluated it.

What may change the work

As the home starts over, bare steel, machined surfaces, tooling and unpainted castings develop flash rust within hours in a saturated space.

Read the explanation

As the home starts over, materials in a plant fail in ways nobody expects. As the home starts over, bare steel, machined surfaces, tooling and unpainted castings develop flash rust within hours in a saturated space.

Help near you

Industrial Water Damage Cleanup near Florida

Start with your area below, or call (877) 289-0037 and describe what set this off.

Alachua, FLAlford, FLAltamonte Springs, FLAltha, FLAltoona, FLAlturas, FLAlva, FLAnna Maria, FLAnthony, FLApalachicola, FLApollo Beach, FLApopka, FLArcadia, FLArcher, FLArgyle, FLAripeka, FLAstatula, FLAstor, FLAtlantic Beach, FLAuburndale, FLAvon Park, FLBabson Park, FLBagdad, FLBaker, FLBalm, FLBarberville, FLBartow, FLBascom, FLBay Pines, FLBell, FLBelle Glade, FLBelleair Beach, FLBelleview, FLBeverly Hills, FLBig Pine Key, FLBlountstown, FLBoca Grande, FLBoca Raton, FLBokeelia, FLBonifay, FLBonita Springs, FLBostwick, FLBowling Green, FLBoynton Beach, FLBradenton, FLBradenton Beach, FLBradley, FLBrandon, FLBranford, FLBristol, FLBronson, FLBrooker, FLBrooksville, FLBryceville, FLBunnell, FLBushnell, FLCallahan, FLCampbellton, FLCanal Point, FLCandler, FLCantonment, FLCape Canaveral, FLCape Coral, FLCaptiva, FLCarrabelle, FLCaryville, FLCassadaga, FLCasselberry, FLCedar Key, FLCenter Hill, FLCentury, FLChattahoochee, FLChiefland, FLChipley, FLChokoloskee, FLChristmas, FLCitra, FLClarcona, FLClarksville, FLClearwater, FLClearwater Beach, FLClermont, FLClewiston, FLCocoa, FLCocoa Beach, FLCoconut Creek, FLColeman, FLCopeland, FLCoral Gables, FLCoral Springs, FLCortez, FLCottondale, FLCrawfordville, FLCrescent City, FLCrestview, FLCross City, FLCrystal Beach, FLCrystal River, FLCrystal Springs, FLCypress, FLDade City, FLDania, FLDavenport, FLDay, FLDaytona Beach, FLDe Leon Springs, FLDebary, FLDeerfield Beach, FLDefuniak Springs, FLDeland, FLDelray Beach, FLDeltona, FLDestin, FLDoctors Inlet, FLDover, FLDundee, FLDunedin, FLDunnellon, FLDurant, FLEagle Lake, FLEarleton, FLEast Palatka, FLEastlake Weir, FLEastpoint, FLEaton Park, FLEbro, FLEdgewater, FLEglin Afb, FLEl Jobean, FLElfers, FLElkton, FLEllenton, FLEnglewood, FLEstero, FLEustis, FLEverglades City, FLEvinston, FLFairfield, FLFelda, FLFellsmere, FLFernandina Beach, FLFerndale, FLFlagler Beach, FLFleming Island, FLFlorahome, FLFloral City, FLFort Lauderdale, FLFort Mc Coy, FLFort Meade, FLFort Myers, FLFort Myers Beach, FLFort Ogden, FLFort Pierce, FLFort Walton Beach, FLFort White, FLFountain, FLFreeport, FLFrostproof, FLFruitland Park, FLGainesville, FLGeneva, FLGeorgetown, FLGibsonton, FLGlen Saint Mary, FLGlenwood, FLGoldenrod, FLGonzalez, FLGoodland, FLGotha, FLGraceville, FLGraham, FLGrand Island, FLGrand Ridge, FLGrandin, FLGrant, FLGreen Cove Springs, FLGreenacres, FLGreensboro, FLGreenville, FLGreenwood, FLGretna, FLGroveland, FLGulf Breeze, FLGulf Hammock, FLHaines City, FLHallandale, FLHampton, FLHastings, FLHavana, FLHawthorne, FLHernando, FLHialeah, FLHigh Springs, FLHighland City, FLHilliard, FLHobe Sound, FLHolder, FLHoliday, FLHollister, FLHollywood, FLHolmes Beach, FLHolt, FLHomeland, FLHomestead, FLHomosassa, FLHomosassa Springs, FLHorseshoe Beach, FLHosford, FLHowey In The Hills, FLHudson, FLHurlburt Field, FLImmokalee, FLIndialantic, FLIndian Lake Estates, FLIndian Rocks Beach, FLIndiantown, FLInglis, FLIntercession City, FLInterlachen, FLInverness, FLIslamorada, FLIsland Grove, FLIstachatta, FLJacksonville, FLJacksonville Beach, FLJasper, FLJay, FLJennings, FLJensen Beach, FLJupiter, FLKathleen, FLKenansville, FLKey Biscayne, FLKey Colony Beach, FLKey Largo, FLKey West, FLKeystone Heights, FLKillarney, FLKissimmee, FLLa Crosse, FLLabelle, FLLacoochee, FLLady Lake, FLLake Alfred, FLLake Butler, FLLake City, FLLake Como, FLLake Geneva, FLLake Hamilton, FLLake Harbor, FLLake Helen, FLLake Mary, FLLake Monroe, FLLake Panasoffkee, FLLake Placid, FLLake Wales, FLLake Worth, FLLakeland, FLLakeshore, FLLamont, FLLanark Village, FLLand O Lakes, FLLargo, FLLaurel, FLLaurel Hill, FLLawtey, FLLecanto, FLLee, FLLeesburg, FLLehigh Acres, FLLithia, FLLive Oak, FLLloyd, FLLochloosa, FLLong Key, FLLongboat Key, FLLongwood, FLLorida, FLLoughman, FLLowell, FLLoxahatchee, FLLulu, FLLutz, FLLynn Haven, FLMacclenny, FLMadison, FLMaitland, FLMalabar, FLMalone, FLManasota, FLMango, FLMarathon, FLMarathon Shores, FLMarco Island, FLMargate, FLMarianna, FLMary Esther, FLMascotte, FLMayo, FLMc Alpin, FLMc David, FLMc Intosh, FLMelbourne, FLMelbourne Beach, FLMelrose, FLMerritt Island, FLMexico Beach, FLMiami, FLMiami Beach, FLMiami Gardens, FLMicanopy, FLMid Florida, FLMiddleburg, FLMidway, FLMilligan, FLMilton, FLMims, FLMinneola, FLMiramar Beach, FLMolino, FLMonticello, FLMontverde, FLMoore Haven, FLMorriston, FLMossy Head, FLMount Dora, FLMulberry, FLMurdock, FLMyakka City, FLNalcrest, FLNaples, FLNavarre, FLNeptune Beach, FLNew Port Richey, FLNew Smyrna Beach, FLNewberry, FLNiceville, FLNichols, FLNobleton, FLNocatee, FLNokomis, FLNoma, FLNorth Fort Myers, FLNorth Miami Beach, FLNorth Palm Beach, FLNorth Port, FLO Brien, FLOak Hill, FLOakland, FLOcala, FLOchopee, FLOcklawaha, FLOcoee, FLOdessa, FLOkahumpka, FLOkeechobee, FLOld Town, FLOldsmar, FLOlustee, FLOna, FLOneco, FLOpa Locka, FLOrange City, FLOrange Lake, FLOrange Park, FLOrange Springs, FLOrlando, FLOrmond Beach, FLOsprey, FLOsteen, FLOtter Creek, FLOviedo, FLOxford, FLOzona, FLPahokee, FLPaisley, FLPalatka, FLPalm Bay, FLPalm Beach, FLPalm Beach Gardens, FLPalm City, FLPalm Coast, FLPalm Harbor, FLPalmdale, FLPalmetto, FLPanacea, FLPanama City, FLPanama City Beach, FLParrish, FLPatrick Afb, FLPaxton, FLPembroke Pines, FLPenney Farms, FLPensacola, FLPerry, FLPierson, FLPineland, FLPinellas Park, FLPinetta, FLPlacida, FLPlant City, FLPlantation, FLPlymouth, FLPolk City, FLPomona Park, FLPompano Beach, FLPonce De Leon, FLPonte Vedra, FLPonte Vedra Beach, FLPort Charlotte, FLPort Orange, FLPort Richey, FLPort Saint Joe, FLPort Saint Lucie, FLPort Salerno, FLPunta Gorda, FLPutnam Hall, FLQuincy, FLRaiford, FLReddick, FLRiver Ranch, FLRiverview, FLRockledge, FLRoseland, FLRosemary Beach, FLRotonda West, FLRoyal Palm Beach, FLRuskin, FLSafety Harbor, FLSaint Augustine, FLSaint Cloud, FLSaint James City, FLSaint Johns, FLSaint Leo, FLSaint Marks, FLSaint Petersburg, FLSalem, FLSan Antonio, FLSan Mateo, FLSanderson, FLSanford, FLSanibel, FLSanta Rosa Beach, FLSarasota, FLSatellite Beach, FLSatsuma, FLScottsmoor, FLSebastian, FLSebring, FLSeffner, FLSeminole, FLSeville, FLShady Grove, FLShalimar, FLSharpes, FLSilver Springs, FLSneads, FLSopchoppy, FLSorrento, FLSouth Bay, FLSparr, FLSpring Hill, FLStarke, FLSteinhatchee, FLStuart, FLSumatra, FLSummerfield, FLSummerland Key, FLSumterville, FLSun City, FLSun City Center, FLSuwannee, FLSydney, FLTallahassee, FLTallevast, FLTampa, FLTangerine, FLTarpon Springs, FLTavares, FLTavernier, FLTelogia, FLTerra Ceia, FLThe Villages, FLThonotosassa, FLTitusville, FLTrenton, FLTrilby, FLUmatilla, FLValparaiso, FLValrico, FLVenice, FLVenus, FLVernon, FLVero Beach, FLWabasso, FLWacissa, FLWaldo, FLWauchula, FLWausau, FLWaverly, FLWebster, FLWeirsdale, FLWelaka, FLWellborn, FLWellington, FLWesley Chapel, FLWest Palm Beach, FLWestville, FLWewahitchka, FLWhite Springs, FLWildwood, FLWilliston, FLWimauma, FLWindermere, FLWinter Beach, FLWinter Garden, FLWinter Haven, FLWinter Park, FLWinter Springs, FLWoodville, FLWorthington Springs, FLYalaha, FLYankeetown, FLYoungstown, FLYulee, FLZellwood, FLZephyrhills, FLZolfo Springs, FL

You may also need

Related water-damage services

Common questions

Questions about industrial water cleanup

Can you dry our production equipment?

On the way back to normal, we dry the space, the slab and the structure around it, and we control humidity fast to limit corrosion.

Can we start a machine just to see if it still runs?

On the way back to normal, no. To put this behind you, energizing wet equipment risks arc flash, destroyed motor windings and permanent damage to drives and control boards.

How do you handle our site safety requirements?

As the home starts over, we complete your contractor orientation, sign in, permits and escort requirements before crews enter.

How much does industrial water damage cleanup cost?

As the home starts over, as national estimates, a plant area up to about 10,000 square feet of open concrete commonly runs $10,000 to $40,000.

How long until we can run production again?

For a clean slate, water removal is usually a matter of hours to a shift. To put this behind you, drying concrete commonly takes 5 to 10 days, occasionally longer.

Why does concrete take so long to dry?

As the home starts over, a slab absorbs water into its pore structure and releases it slowly from the surface. On the way back to normal, that is bound water in a low permeance material, which needs sustained low humidity and airflow instead of more fans.

Will our machined surfaces rust?

On the way back to normal, flash rust can start on bare steel and machined surfaces within hours in a saturated space. To put this behind you, dropping humidity without delay is the best protection we can provide.

Talk with a restoration specialist

Water loss in Florida?

Describe the source, the impacted rooms, and when you first noticed the damage.

Call (877) 289-0037

Areas we serve

Water-damage help near Florida

Our fresh-start team assess homes, businesses, and managed properties throughout Florida and nearby communities.

View the area on Google Maps
Call (877) 289-0037